One of the biggest concerns for a roofer is safety. Safety could mean the difference between life and death for a roofer. One of the worse problems for a roofer is keep safe when on a really steep slope roof. Every roofer should practice and teach their workers to look closely at the safety of not only the roofers, but to the homeowner and to the task site as well. The importance of safety shows that the roofing company who integrates this into their company and considers this as their first and foremost priority. By roofers abiding the proper safety regulations means they not merely value their company, but they also care about the well-being of the task site. An expert roofing company always considers safety as something which helps them get well-deserved respect from their roofer dunfermline peers, and the accidents that will happen are decreased, which up’s their reputation in being truly a accident free and more profitable roofing company.
Safety good sense is another section of practicing roofer safety. Roofers should take their time when working, as working so fast and hoping to get the work done faster than it will have finished is bound to bring needless accidents to the job site. Tailoring safety to different projects that are happening is another way in order to avoid accidents. Including talking with the roofers and having a mutual understanding with them regarding the safety importance on that one job site. Also, discourage unsafe work practices. Leading by example may also help the roofing employees know, understand, and implement them within their own work while on the work site.
Keepin constantly your job site clean. This will be good sense to anyone, but you would be surprised at just how many roofers do not think hard about keeping the task site clean and organized. Less hazards, such as tripping, and identifying all danger areas and avoiding them produces a professional job and crew. The most productive job sites are monitored and always being cleaned up by the pick up crew so the work just flows better.
All roofers use some type of ladders, and used properly, these ladders can be a roofers companion, used improperly, they could be a roofers worst enemy. There are many forms of ladders, and the Type 1A ladders are the best one’s to use. Roofers should always use ladders that adapt to local codes and/or are OSHA approved. Inspecting the ladder rungs, inspecting the ladders functions, the ropes, pulleys, and cleaning any tar, oil, or dirt from these rungs must be the main thing to find and clean. Never use any ladder that is damaged, throw them out, and never trust homemade ladders. After the finish of the afternoon, use ladder safety, never leave ladders unattended, only allow professional roofers to use the ladders, never the homeowners, defeat all ladders on the work site and lock them together on the ground overnight.
Electrical wiring has claimed many deaths of roofers because of metal ladders being setup near these electrical wires. Never trust electricity, electricity can travel in one wire to another wire, even ladders that are set up several feet away. Keep always a non-conductive ladder on the work site. Keep your distance from these electrical wires.
When you climb a ladder, there’s a suitable way, and a amateur way, that is what sets the professional from the amateur. Keep that person towards the ladder, use your hands, step using one rung at a time, and never slide down a ladder, this really is very unprofessional. Make fully sure your boots/shoes are clean of any oils and dirt and tar. Don’t overload ladders, only one roofer at any given time please on a ladder for safety’s sake.
Make sure to always secure the base of a ladder, put on a level, solid ground. Secure the the top of ladder with some plywood ladder brace. Set the ladder against a great backing. Also, try to extend the ladder 36″ above the landing or roof eave for maximum protection and safety.
Decks and Traction is another safety precaution that needs to be talked about. Reduce tripping hazards, keep the job area mess free, shingle granules can end up like ball bearings, that may cause a slip and fall hazard. Clean the deck of the and dirt to greatly help with traction. Wear safe footwear. Roof deck protection helps so much when providing protection from the hazards of traction.
Roofers use many tools, hammer safety requires eye protection to be worn at all times to safeguard your eyes. Hit the nails squarely to keep the nails from flying back at you, discard damaged hammers. Power Nailer Safety, these tools must be treated with the up most respect. Check your power nailer for correct operation, operate when in place on the material to be nailed, never rest the tool against your system, and always of course wear safety glasses, keep this and all tools clean and in working order. Never, ever point a claw gun or any other tool at anyone, they are not toys and should be treated as such.
Utility Knifes have many uses for the roofer, always cut away from the human body, make fully sure your blades are usually sharp, never dull, retract the blade when storing in the tool box.
Last although not least, handling of material must certanly be finished with obviously safety. Use your legs when lifting heavy materials, always use your legs, never your back. Lift one bundle at any given time, don’t overload your back, and store materials near the roof, the closer to the roof, the easier and safer it’s and also taking less time and less energy waste to retrieve the roofing material.